Tanha, Part 4

(Mr. Obvious knows that it’s been a while…use this link to recall the minutiae to date.)

The commission of server HONNE brought much stability, disk space, and peace of mind to the LAN’d of 118 Henry Street. The hardware purchases to bring the server to life, however, required correspondingly much dollars and effort. The practical realities of discretionary poverty cooled our  obsession vision for a while.

Still, when there was nothing else to worry with (or, there were many obligations to avoid), we would keep trying to put together a plan for something both useful and unusual. Since the project budget exsanguination, the only cabinet we could afford had to cost $Free.

It’s no exaggeration to say (and to those that know me, no surprise) that the desire to proceed got so strong that one day, we went thru the entire house with a tape measure and sized up virtually every piece of furniture as a candidate for server cabinet. Within a couple of hours, we had our victim.

Not the cat…the sewing machine cabinet

And so, the sketching began in earnest…

Click for a larger, more readable version

The exterior and structural parts of the cabinet were easy to re-purpose for our 21st century needs. Most of the design time was spent modeling the insides of the cabinet. The last design decision, after much gnashing and machination, was to purchase one more piece of hardware. Instead of building the electronic innards from scratch, we would use a rack mount server case as a chassis.

The heart of the beast, it beats (with Windows Server 2008 R2)

Adapting the sewing machine cabinet involved building 2 shelves inside it’s exterior structural shell. One shelf below , and one shelf above the server chassis .

The bottom shelf as viewed from the southern hemisphere

The top shelf as viewed with the hatch open

Another top view…yes, that power strip is factory color

The top compartment has the hard drive for system image backup (one of 3 methods used for system redundancy), a built in network switch and some ventilation fans.

Back view of an early trial fit for the server chassis

Front view with the door open (still looking for a display plate to cover the lights)

Proper ventilation and resultant heat dissipation were critical to the final form. The server chassis has 4 ventilation fans and the cabinet has 5. This creature is not quiet but it sure runs cool.

Ambient room temp 78 degrees (click to see disk temps)

That’s a max disk temp of 9 degrees above ambient…geek out!

Our fav pic so far

With the exterior decoration, we’ve stopped about halfway around the world on our journey to Tibet, resting somewhere near Morocco for now. The obsession vision isn’t quite complete, but, as they say….don’t hold your breath.

PS..check out the updated network diagram.